PSE has listed its EZ.220 Snap Spacer System as a set of kits at $59.99 USD on the company's own store. The spacers let you adjust cam lean and limb vise pocket systems in increments of 0.010 and 0.020 inches. PSE says the work can be done without extended time in a bow press. Each kit comes with a removal and installation tool, plus written instructions for using it.
There are two kits. The .020 set covers .060 and .160, .080 and .140, and .100 and .120. The .010 set covers .070 and .150, .090 and .130, and .110 and .110. Every pair in both kits adds up to .220 across, which is probably where the name comes from. Pick a pair from the chart and you've already picked the spacing you're going to run on the bow.
The size chart does a lot of the thinking for you. You don't need to work out the math on your own, and that's a small but real help for a shooter who is tuning at the kitchen table.
From a design and tuning angle, this is the kind of tool I like, because it turns guessing into measuring. Cam lean gets blamed for a lot of problems. A bow that won't group might have a cam issue, an arrow issue or a shooter issue, and those are hard to tell apart by feel. Tuning gets easier when you can change one thing in small steps. The spacer doesn't fix anything by itself. What it gives you is a cleaner way to test one variable at a time.
Lancaster Archery's listing for the same kit is marked no longer available. PSE's own store shows every size option as sold out. Lancaster's page shows the same $59.99 price, so the number is consistent across both sellers. Stock can come back, but you can't count on buying one today, so check with a dealer before you build a plan around it.
Check the fit before you order, too. Lancaster's listing names a group of older PSE models as compatible, and the official page doesn't give a model list at all. Ask a dealer to confirm your bow's year and model before you spend any money.
The method matters more than the tool. Change one spacer step, shoot a group at a fixed distance, and write the result down. Then make the next change. Don't move the spacer and the arrows at the same time, because a group that shifts tells you something when nothing else has changed. Change two things at once and you're guessing again. That's the trap a lot of archers fall into, and a kit like this can't fix it for you.
A snap spacer changes the job from a press job to a bench job, at least in principle. You still need the bow set up right to begin with, and a kit doesn't change that part of the job.
The payoff is that testing gets cheaper, and cheaper testing usually means more testing, which is where real tuning happens. Nobody wants to pull a press out for every small change, so many archers simply stop testing. That's the gap a kit like this can close, if the archer is willing to use it for the boring work.
Before you touch any spacer, get the bow's basic setup checked against the manufacturer's tune chart. PSE links its tune charts from the same store pages, so the reference is easy to find. A snap spacer helps you move back toward a setup that's already close. If the bow is far off the chart, you need a shop to look at the limbs and cams, and that's a job for a technician, not a weekend.
Arrow spine and point weight move the group too. Archers often blame the bow for an arrow problem. A tune chart and a paper test can separate the two, and that step costs nothing but time.
Whatever you change, keep the safety side in view. Loosen parts slowly and check every screw after each change. Don't force a spacer into place. A tool that feels easy is easy to rush, and rushing is how people strip threads or scratch a limb. Work on a clean bench with the bow fully supported, and keep the removal tool where you can find it. Write down which way each spacer went, so you can put it back if the group gets worse.
The two increments answer different questions. A coarse step is easier to read on a group, so that's the better place to start. A fine step gives you a finer dial, but it pays off when your shooting is steady enough to show the difference. A shooter who groups loosely won't see a 0.010 change at all. That's a shooting problem, not a bow problem, and it's worth knowing which one you have before you buy the finer set. Release and anchor problems usually show up as drift long before the cams are a few thousandths off. Get the form steady before anything else, and then use the spacer to chase whatever difference is left over.
I haven't run this kit on a bow myself, so everything here comes from the product pages and from the design side. Neither page shows a fit chart for every model, and neither gives any long-term wear data. Anything beyond that is a question you'd need to take to the dealer or straight to PSE.
For a coach, a tool like this gives a student one variable to test and a reason to keep notes. That habit matters more than the hardware. A kit that sits in a drawer tunes nothing. The notebook is the part that teaches the shooter what the bow is actually doing.
Think about the cost of the whole job, too. A set of spacers is cheap next to a new arrow set or a new sight, but it's not free, and it isn't the sole thing you'll spend money on while tuning. A shop visit, a few new strings and a bag of test arrows add up fast. Plan the whole budget before you start chasing groups around the target, and write the total down before you buy anything.
At $59.99, the price is a reasonable bet for the right archer. For many people, the fit list and the model year will settle the question. Read both before you add it to the cart, and don't assume a kit that fits one generation fits the next.
Cam lean is easy to misread, so check the term against your bow's manual before you change anything. Some manuals describe the same adjustment with different words, and that's a good way to end up turning the wrong thing.
This is a small product with a clear purpose. Read the fit list, check the stock and test one change at a time, and keep the notes so the next tune starts from what you already know.