I've run an archery club for 11 years, and one conversation comes up more than any other. Someone buys a new bow, walks in with a shoebox of accessories off the old one, and asks which of it still works. Sometimes the answer is most of it. Sometimes it's almost none of it, and that's a rough afternoon for everybody.
So when Trophy Ridge rolled out its 2027 lineup on September 30, 2026, I didn't read it as a pile of new products. I read it as a set of answers to that shoebox question. Some of the answers are more interesting than others, and there is a fair amount about this lineup I cannot tell you.
Take the Trinity Mounting System first. It's one sight bracket built to mount three different ways. You get a dovetail mount, which Trophy Ridge pitches as giving you "maximum mobility." You get a Bridge-Lock mount for what they call a "streamlined integrated setup." And you get an adjustable-length fixed hunter bracket for a "rock-solid traditional configuration." Their words, not mine.
A quick note on Bridge-Lock, because people ask. That's Mathews' registered technology. The name and the system belong to them. I'm only mentioning it so you know what that Bridge-Lock option actually is when you see it on the spec sheet.
Trinity lives on two sights, the React 5 Max and the React 7 Max. Both are listed at $299.99 on Trophy Ridge's own site. This is the part many people will miss. The product pages list the mounting system as Standard, Picatinny, or Trinity. So you're choosing your mount when you buy the sight, based on what your bow has. Pick Trinity and you've got the three configurations on top of that. Trophy Ridge's own tagline for it is "Three mounting options. One platform." That's a fair summary of the idea, whatever you end up thinking of the execution.
My take here comes from the counter more than from the spec sheets.
In a shop or a club, the expensive problem usually isn't the bow. It's everything bolted to it. A customer moves to a new rig and finds out the sight, the stabilizer setup and the quiver don't carry over cleanly because the interfaces don't line up. So they buy the whole kit again. I've watched people spend more on that second round of accessories than they planned to spend on the bow. Anything that lets a sight follow you from one bow to the next saves the archer money, and honestly, it saves people like me a lot of headaches at the counter.
Part of my own work is designing the bits where one piece of gear meets another, which is why I pay more attention to mounting interfaces than most folks probably should, and it is the lens I read this lineup through.
Now the honest part. I don't know if Trinity is sold on its own or only comes with those two sights. I don't know exactly which bows it's meant to cover. Trophy Ridge says it's "designed to adapt across today's most popular bow platforms," but I couldn't find a list, and I'm not going to guess one for you. If you're shopping for a specific bow, check that before you buy.
On the sights themselves, quickly. Both Max models use Trophy Ridge's React Technology, and their claim is that it sets the pins for you rather than making you walk each one in. The React 5 Max has five pins, with .019" fiber on the top three and .010" on the bottom two, which they say gives a finer aiming point at longer distances. The React 7 Max runs seven pins. Both list a speed-select dial for different arrow speeds and distances and an integrated, rechargeable LED. The React 5 Max also lists micro-click windage, elevation and third axis tuning you can do without tools. I haven't shot either one, so that's spec sheet, not a review.
There are also two new hunting sights, the React H4X and H5X, upgrades of the H4 and H5, with React Technology, tool-less windage and elevation, a rechargeable LED sight light and .019" fiber pins. Their claim is that two adjustments set the rest of the pins. The H5X adds 2.125 inches of adjustable extension. Trophy Ridge says you slide it out for more precision or pull it in for a compact setup. That's their claim, and I'd want to see it on a bow before saying more. I couldn't find an official price for either sight, so I'm leaving that blank rather than making one up.
What struck me is that the rest of the lineup pushes the same idea from different directions.
Take the Precise RKX release, listed at $99.99. It has a convertible handle that switches between three and four fingers, with an adjustable, removable fourth finger in the box. If you coach, you know why that matters. Hands are all over the map. I've had big-handed hunters jammed into a release that fits like a kid's glove, and small-handed shooters reaching for a trigger that's too far away. A handle that changes with the person holding it is useful in a club where gear gets passed around and tried out. It's a spring-loaded single-jaw release with a DLC-coated jaw, adjustable trigger tension and travel, a removable rubber sleeve and a multi-position thumb barrel, finished in matte black. How it actually feels on the shot is something I cannot describe yet, because I have not had one in hand.
The Dusk Quiver is $79.99. It holds five arrows with dual grippers that Trophy Ridge says hold arrows of any diameter, quietly and without rattle. That's a manufacturer claim, and "any diameter" is a big promise, so I'd test it with your own shafts. It has a rubber-lined hood to protect broadheads, a tool-free quick-detach bracket, a built-in hanging loop, and USB-rechargeable red and green LEDs for low light.
Then there's the Seismic Quick Connect at $24.99, the lowest listed price among the pieces here with confirmed pricing. It's a quick-detach mount that lets you put on or pull off a stabilizer in seconds, which helps with transport and storage. It's machined aluminum with stainless steel hardware. Trophy Ridge says its "universal fit works with any stabilizer." I haven't tested that, and I'm not going to vouch for "any" on someone else's behalf. If you run something unusual up front, confirm the thread and the fit before you order one for your setup.
A note on availability. When I checked in mid-October, the RKX, the Dusk and the Seismic pages all showed Sold Out. Please don't read that as discontinued. It's a page status. It could just be early stock on new products. I do not know what it means, and I would rather say that plainly than invent a reason.
One thing I could not find: how these new pieces work with each other, beyond the React sights sharing their technology. Everything here is adjustable or swappable on its own terms. Whether the whole set plays nicely together on one bow is something you would check piece by piece.
So where does that leave you, standing there with your own shoebox? My advice is simple. When you buy accessories now, look at the interface first and everything else second. Pins, lights, finish, all of that matters, but if the mount locks you into one bow, the next upgrade may mean paying for the same kind of gear twice.
On Trinity specifically, I like the thinking. This industry should be heading toward accessories that move across platforms instead of marrying one bow. But right now it's still Trophy Ridge's description of what it does, without detail on who it's for or how it's sold. I'll judge it properly once one is actually on a bow in front of me.